Αναζήτηση:
ΚΑΛΩΣ ΗΛΘΑΤΕ
[Είσοδος Πελάτη | Εγγραφή Πελάτη]
 
Κατηγορίες
Καλάθι αγορών
Το καλάθι σας είναι άδειο.
0Προϊόντα:
EUR0.00Σύνολο:
 
Πληροφορίες
Προϊόντα: 467
Κατηγορίες: 94
Τιμές: Euro
 
Νόμισμα
 
Γλώσσα
 
Θέση: /Ρυθμιστές Φόρτισης/Phocos ρυθμιστές

Phocos PL 60

Phocos PL 60

Πληροφορίες προϊόντων

Ρυθμιστής φόρτισης 12/24/48V 60/7A LCD data logger

60A ψηφιακός προγραμματιζόμενος με δυνατότητα ελέγχου πολλαπλών τάσεων

Energy System Controllers
 

  • 12V, 24V, 32V, 36V and 48V in one controller

  • Built-in 30 days data logger

  • Multifunctional LCD Display

  • External current sensing (optional)

  • RS232 interface (optional)

  • Hybrid system control

  • Widely programmable

  • Built-in programmable logic

PL's four-stage charging algorithm incorporating true Pulse-Width Modulated (PWM) constant voltage control gives you complete control over the whole charging cycle.  All charging voltages and times are adjustable over generously wide ranges.  This allows you to customize the charging regime to suit just about any custom requirements which you, your customer, or your battery manufacturer may have.  Of course, in most cases you can choose from one of our default programs, which cover most types of batteries and systems extremely well.

PL has plenty of other tricks up its sleeves as well.  It can control generators, nightlights, back-up battery charging, many timer applications and much more!!

A comprehensive LCD display shows battery voltage, charge current, Ah in and out, load current, battery temperature (with optional sensor) and more.  System performance data is available for the previous 30 days.  The controller remembers what happened, even if the user may not.

With the optional PLI interface and PLCom software, the user can access all the PL funtions from a remote computer.  All data can be read and all settings adjusted.

Because PL can handle 12, 24, 32, 36 and 48V systems and be set with any battery requirements, you can use PL in almost any battery charging job.  It may be the only regulator you'll ever need to stock. (Higher Voltages Available on Special Order).

Features:

Adjustable: All settings are adjustable and are stored in non-volatile memory so you don't lose your custom set up if the unit needs to be disconnected from the battery.

  Display:  User friendly LCD display.  Each number has a label.

Energy Metering:  Daily load and charge Ah plus State of Charge, all recorded for 30 days

Four Stage Regulation:  Boost, Absorption, Float and Equalization available as appropriate for the battery type.

History:  Records charge and load Ah, Max./Min. battery voltages, SOC, and Float times for the last 30 days.  You can tell how much energy was really collected and used.  The history can be very useful when diagnosing a system problem.

Generator Control:  A sophisticated generator controller is included with four different modes of control and a quiet time option.

Event Control:  A powerful event controller/timer allows the load and/or General Purpose terminal to turn on/off a wide range of loads (eg. Pumps, Lights, Motors etc.) under a user-specified set of conditions.

Alarm:  There is an adjustable high or low battery alarm output which can drive an external alarm device.

Secondary Battery Charging:  When the main battery bank is full, PL can supply a signal to switch a relay so that some or all of the PV input can charge a secondary battery.  Secondary battery charging is also controlled.

Remote Control:  With the optional PLM remote display, all functions can be accessed on PL from up to 100 meters away.  PLM fits in a standard light switch mounting plate.

Data Comms:  Communication with a computer is possible via the  optional PLI RS232 interface.  This allows fast downloading of all data and adjustment of settings.  Can be used via modem for remote sites etc.

Protection:  Protected against short circuits, reverse flow, and lightning.  Low battery load disconnect function built in.  Current limiting in the event of over-temperature or over current.  Full conformal coating protects against corrosion.

External Shunts:  Up to two external shunts can be added using optional DC isolated PLS2 shunt adapters.  Inverter and/or battery charger and other external currents can be included in the Ah readings and SOC.

Hybrid Systems:  Although PL is primarily a device to control charging of batteries with PV panels, it can also be used with other energy sources such as wind, micro-hydro, and fuel-driven generators.  PL supports series and shunt control.  This allows PL to be used in a range of Solar Hybrid system designs. In hybrid systems, the solar component can be controlled through the solar input terminal while the secondary energy source (Wind, Micro-Hydro) is controlled by the shunt control through the Load or General Purpose terminal. 

Available in 20, 40, and 60A Versions:   With use of the optional PLA multiple control unit, the user can use up to three PL charge controllers together to  work in PV systems up to 180 Amps. PLA provides a common communication interface, four alarms or control channel outputs, and control over a seperate load control unit (LS1).

τιμή χωρίς ΦΠΑ

τιμή χωρίς ΦΠΑ

τιμή

Τιμή: EUR540.00 EUR399.00


Κωδικός προϊόντων: 34
 
Ποσότητα: Αγορά
Προτεινόμενα

 
Δημοφιλή προϊόντα
 
Προϊόντα σε έκπτωση

  1. Έκπτωση EUR35100.00

  2. Έκπτωση EUR33000.00

  3. Έκπτωση EUR26000.00

  4. Έκπτωση EUR22010.00

  5. Έκπτωση EUR14500.00

  6. Έκπτωση EUR14100.00

  7. Έκπτωση EUR6500.00

  8. Έκπτωση EUR6010.00

  9. Έκπτωση EUR3297.00

  10. Έκπτωση EUR3063.00
 
Λίστα Ενημέρωσης
Συμπληρώστε το email σας για να λαμβάνετε ενημερωτικά email:
Email: